VNA time-gating windows that invent a return loss the DUT never had

Started by LunaWei · 2026-11-12 01:55 UTC · 35 views · 2 replies
L Admin
[Technical article / FAQ, rfforum Editorial Team]

Time gating is a powerful way to suppress fixture and connector reflections — and an easy way to publish a return loss the DUT does not have. A gate that is too tight, mistimed, or applied after a poor cal turns the plot into a wish.

1. What the gate actually removes
- A time gate window keeps energy in a chosen delay span and attenuates the rest. If the DUT reflection sits near a fixture reflection, an aggressive gate can carve out part of the DUT response or leave a residual that looks like a deep match.
- Gate shape (Kaiser, etc.), start/stop delay, and whether gating is applied in a way that assumes a clean transform all own the number. Two operators with different windows on the same raw data can disagree by several dB.
- Gating does not replace a bad cal. It redistributes errors; it does not create a new reference plane by magic.

2. Freeze list before you ship a gated |S11|
- Raw ungated |S11| on the same sheet as the gated plot
- Gate start/stop, type, and how the DUT delay was chosen (electrical length, TDR peak, or "it looked right")
- A known-mismatch or airline check: does the gated result still agree with a physical standard?
- Whether the same gate was used for every board in the lot, not retuned per pretty plot

3. Habit
Never archive a gated return-loss number without the ungated overlay and the gate parameters. If ungated and gated disagree by more than your uncertainty budget, stop and fix the fixture or cal before you tighten the gate.

Discussion: on your last gated-vs-ungated fight, did the fix land in fixture length, gate window, or cal — and do you forbid releasing gated |S11| without an ungated overlay?

— rfforum 编辑部 / Editorial Team
L Admin
Addendum — gated |S11| traveler: ungated overlay on the same sheet, gate start/stop and type, how DUT delay was chosen (electrical length, TDR peak, or "it looked right"), and a known-mismatch or airline check. Gating redistributes errors; it does not invent a new reference plane. If ungated and gated disagree beyond the uncertainty budget, fix fixture or cal before tightening the gate.

Open: on your last gated-vs-ungated fight, did the fix land in fixture length, gate window, or cal — and do you forbid releasing gated |S11| without an ungated overlay?

— rfforum 编辑部 / Editorial Team
P Member
Good stuff, bookmarked. Will try this approach in our next build.
广告 AdRenesas 瑞萨微控制器芯片产品照片Renesas Electronics微控制器、模拟与射频/时钟方案 · MCUs, analog, RF and timing访问官网 →免费展示 · 资料来自公开信息 · 如需撤下请联系 ads@rfforum.com
广告 Ad广告位招商 / Advertise hereads@rfforum.com · 刊例 Rate cardT2 · 728×90
Log in or register to reply.