FR1 PUCCH power-control hunting under AGC: a closed loop that looks like a fading problem

Started by LunaWei · 2026-11-13 01:47 UTC · 36 views · 2 replies
L Admin
[Technical article / FAQ, rfforum Editorial Team]

Uplink control that "hunts" in power or EVM is often blamed on channel fading when the real fight is between UE power control, base-station AGC, and the timing of the PUCCH grant. The air looks bad; the logs show a loop chasing itself.

1. What the loops actually collide on
- UE open-loop and closed-loop power control set PUSCH/PUCCH power from path loss and TPC commands. AGC on the gNB side simultaneously moves the front-end gain to keep the ADC happy.
- If AGC steps are large or slow relative to the PUCCH format duration, the UE sees a changing RSSI/RSRP estimate and keeps correcting; the gNB sees a moving input level and keeps AGC-ing. The spectrogram looks like fading; the counters look like power-control thrash.
- Format 0/1 vs longer formats, and whether SRS or a wideband RS is available for the same slot, change how fast the UE can estimate the channel. A short PUCCH on a fast AGC is the classic trap.

2. Freeze list before you open a fading or PA-linearity ECO
- gNB AGC step size, attack/release, and whether AGC is frozen during the PUCCH symbol window
- UE TPC history and commanded vs applied power for the same HARQ/PUCCH occasions
- Whether the hunt survives with a fixed gNB gain (lab) or a narrower AGC range
- Time alignment: does the hunt correlate with AGC gain changes in the same few slots, not with Doppler or multipath metrics?

3. Habit
Never freeze "severe fading on PUCCH" from a spectrogram alone. Archive AGC settings and UE TPC traces next to every uplink control EVM or miss claim. If freezing AGC or slowing its attack kills the hunt, the channel model was never the patient.

4. Practical gate
- Reproduce with fixed gain on the gNB RF; if the hunt dies, fix AGC/TPC interaction first
- Log commanded vs applied UE power on the same timeline as gNB AGC gain
- Check whether only short PUCCH formats fail while longer PUSCH looks fine — that is a loop-timing clue

Discussion: on your last PUCCH power hunt, did the fix land in AGC freeze/window, TPC step size, or format choice — and do you require a fixed-gain lab check before blaming the channel?

— rfforum 编辑部 / Editorial Team
L Admin
Addendum — PUCCH hunt traveler: gNB AGC step size and attack/release (and whether AGC is frozen in the PUCCH symbol window), UE commanded vs applied power on the same timeline, and a fixed-gain lab repeat. A spectrogram that “looks like fading” is not a channel ticket until those three are on the sheet.

If only short PUCCH formats hunt while longer PUSCH looks fine, start with loop timing, not the fading model. Freezing AGC or slowing its attack is the cheapest fork.

Open: on your last PUCCH power hunt, did the fix land in AGC freeze/window, TPC step size, or format choice — and do you require a fixed-gain lab check before blaming the channel?

— rfforum 编辑部 / Editorial Team
R Member
Ran into something similar last year. Turned out to be a power integrity issue. Worth checking first.
广告 AdRenesas 瑞萨微控制器芯片产品照片Renesas Electronics微控制器、模拟与射频/时钟方案 · MCUs, analog, RF and timing访问官网 →免费展示 · 资料来自公开信息 · 如需撤下请联系 ads@rfforum.com
广告 Ad广告位招商 / Advertise hereads@rfforum.com · 刊例 Rate cardT2 · 728×90
Log in or register to reply.