Absorbing boundary that still reflects: a resonance that belonged to the box, not the DUT

Started by LunaWei · 2026-11-13 01:47 UTC · 31 views · 2 replies
L Admin
[Technical article / FAQ, rfforum Editorial Team]

A cavity or enclosure simulation can show a sharp resonance that survives every DUT tweak because the resonance lives in the truncated domain or the absorbing boundary, not in the product. PML, Mur, and "absorbing" foam in a measurement box all have residual reflection; at the wrong frequency that residual looks like a Q you will never solder away.

1. What the boundary actually owns
- Numerical absorbing layers have a reflection coefficient that depends on incidence angle and frequency. A mode that grazes the boundary can bounce enough to fake a cavity peak.
- Domain size and the distance from the DUT to the absorber set which modes fit. Growing the box by λ/4 and watching the peak move (or die) is cheaper than respining the shield.
- In the lab, absorber foam and liner gaps create the same class of artifact: a "box mode" that tracks lid torque and foam compression more than DUT geometry.

2. Freeze list before you redesign the shield or the board
- Boundary type, thickness, and distance from the nearest metal of the DUT
- Whether the peak frequency moves when you enlarge the domain or thicken the absorber (sim) / add foam or change lid gap (lab)
- Field plots: energy piled on the boundary or in the air volume, versus on the DUT seams
- Mesh/convergence: a under-resolved PML can invent lossy resonances that vanish with tighter mesh

3. Habit
Never open a shield ECO for a resonance that moves when only the box or the PML changes. Archive domain size, boundary settings, and a "larger box" check next to every unexplained cavity peak. If the peak tracks the lid gap and not the board stackup, stop etching the PCB.

4. Practical gate
- Sim: re-run with +λ/4 domain and thicker absorber; lab: change foam or lid gap with the same DUT
- If the peak moves more than the DUT geometry did, the box owns the ticket
- Name the boundary in the same sentence as the resonance frequency

Discussion: on your last false cavity peak, did the fix land in domain size, absorber, or lid gap — and do you require a larger-box check before freezing a shield redesign?

— rfforum 编辑部 / Editorial Team
L Admin
Addendum — cavity-peak traveler: boundary type and thickness, DUT-to-absorber distance, and a “larger box” check (+λ/4 domain or thicker absorber in sim; foam or lid-gap change in the lab) next to every unexplained resonance frequency. If the peak moves when only the box or the PML changes, do not open a shield or PCB ECO.

Name the boundary in the same sentence as the frequency. Field energy piled on the wall or in the air volume, not on the DUT seams, is the same story.

Open: on your last false cavity peak, did the fix land in domain size, absorber, or lid gap — and do you require a larger-box check before freezing a shield redesign?

— rfforum 编辑部 / Editorial Team
E Member
Question: how sensitive is this to temperature? Any thermal test data?
广告 AdRenesas 瑞萨微控制器芯片产品照片Renesas Electronics微控制器、模拟与射频/时钟方案 · MCUs, analog, RF and timing访问官网 →免费展示 · 资料来自公开信息 · 如需撤下请联系 ads@rfforum.com
广告 Ad广告位招商 / Advertise hereads@rfforum.com · 刊例 Rate cardT2 · 728×90
Log in or register to reply.