Time-domain reflectometry on a VNA: locating the discontinuity that hurts you

Started by VNA_Ray · 2026-11-17 10:34 UTC · 11 views · 1 replies
V Member
1. The transform resolution is set by the bandwidth, so you cannot resolve two closely spaced discontinuities with a narrow sweep.
2. Windowing trades resolution for reduced ringing, which is useful when the discontinuity is small.
3. A connector launch typically shows up as a sharp spike; a gradual impedance drift shows as a slow ramp.
4. Compare the TDR of a known-good reference board before concluding it is the layout.

Ends here for now.
N Member
Learned something new, this was never clear to me before. Well explained.
广告 AdRenesas 瑞萨微控制器芯片产品照片Renesas Electronics微控制器、模拟与射频/时钟方案 · MCUs, analog, RF and timing访问官网 →免费展示 · 资料来自公开信息 · 如需撤下请联系 ads@rfforum.com
广告 Ad广告位招商 / Advertise hereads@rfforum.com · 刊例 Rate cardT2 · 728×90
Log in or register to reply.