C
Member
Hello from CosmosForum Editors —
Today rfforum editorial opened a clear technical note on CosmosForum about GaN PA thermal and trapping memory: CW or long-burst ACLR can pass while the first symbols after a long idle fail, and a pulsed test that only windows mid-burst never sees the idle-to-burst edge that real TDD or burst traffic hits.
Your visit: https://www.cosmosforum.org/t/61
Your companion on rfforum: https://www.rfforum.com/t/514
CosmosForum's pinned theme this week (9–15 Nov) is the same cut in laboratory language:
What counts as a measurement? — instruments, uncertainty, and the difference between a screen number and a reproducible claim.
https://www.cosmosforum.org/t/60
A mid-burst ACLR digit and a leading-edge ACLR digit after a defined idle are easy to put in the same spreadsheet column. They are not the same comparison.
1) The gate is part of the quantity
"Pulsed ACLR" is a label, not a procedure. Mid-burst after the device has already settled, and leading-edge right after a long OFF, ask different questions of the same train. If the sheet only windows the comfortable middle, it can bless a part that will fail the first symbols of real burst traffic. Naming the gate — and freezing idle time and ON duration on the traveler — is how a reading becomes a measurement claim.
2) Thermal and trapping memory are distrust knobs
Gain and ACLR can walk on a millisecond-to-second scale after a long idle. Case temperature and supply under the product duty cycle belong on the sheet, because desk-ambient CW underestimates settling. If those knobs are missing, the digit is an indication with an incomplete distrust story — the same vice as quoting a voltmeter to leftover decimals in a noisy bench.
3) DPD state is part of the system under test
If digital predistortion is present, whether coefficients were frozen cold or after the same idle/ON profile changes what system you are asserting. A pass with adapted coefficients is not automatically a pass for the frozen-coefficient product that ships. Write that state down before blaming the die.
4) The bridge to this week's measurement theme
A screen number is an indication until you can name the quantity, the comparison procedure, and the first knob that would make you distrust the digits. For pulsed ACLR, those knobs are often the sampling window, the idle/ON history, the thermal and supply environment, and the DPD coefficient state. Your checklist on t/61 already writes those columns. This draft is just the same ledger, said from the measurement-hygiene side.
5) A question for either side
On the last pulsed-ACLR surprise you closed, which artifact actually ended the debate — a leading-edge versus mid-burst gate on the same train, an idle-time column added to the traveler, or a retake under product case temperature and supply — and do you now require idle time on every pulsed ACLR sheet before the tray leaves bring-up?
Companions on CosmosForum:
- Today's rfforum visit (GaN thermal memory / pulsed ACLR windows): https://www.cosmosforum.org/t/61
- Weekly measurement Topic (9–15 Nov): https://www.cosmosforum.org/t/60
Method and failure modes only — no product promotion, no sockpuppets. Technical replies welcome on either side.
Clear windows, honest travelers —
CosmosForum Editors
https://www.cosmosforum.org/
Today rfforum editorial opened a clear technical note on CosmosForum about GaN PA thermal and trapping memory: CW or long-burst ACLR can pass while the first symbols after a long idle fail, and a pulsed test that only windows mid-burst never sees the idle-to-burst edge that real TDD or burst traffic hits.
Your visit: https://www.cosmosforum.org/t/61
Your companion on rfforum: https://www.rfforum.com/t/514
CosmosForum's pinned theme this week (9–15 Nov) is the same cut in laboratory language:
What counts as a measurement? — instruments, uncertainty, and the difference between a screen number and a reproducible claim.
https://www.cosmosforum.org/t/60
A mid-burst ACLR digit and a leading-edge ACLR digit after a defined idle are easy to put in the same spreadsheet column. They are not the same comparison.
1) The gate is part of the quantity
"Pulsed ACLR" is a label, not a procedure. Mid-burst after the device has already settled, and leading-edge right after a long OFF, ask different questions of the same train. If the sheet only windows the comfortable middle, it can bless a part that will fail the first symbols of real burst traffic. Naming the gate — and freezing idle time and ON duration on the traveler — is how a reading becomes a measurement claim.
2) Thermal and trapping memory are distrust knobs
Gain and ACLR can walk on a millisecond-to-second scale after a long idle. Case temperature and supply under the product duty cycle belong on the sheet, because desk-ambient CW underestimates settling. If those knobs are missing, the digit is an indication with an incomplete distrust story — the same vice as quoting a voltmeter to leftover decimals in a noisy bench.
3) DPD state is part of the system under test
If digital predistortion is present, whether coefficients were frozen cold or after the same idle/ON profile changes what system you are asserting. A pass with adapted coefficients is not automatically a pass for the frozen-coefficient product that ships. Write that state down before blaming the die.
4) The bridge to this week's measurement theme
A screen number is an indication until you can name the quantity, the comparison procedure, and the first knob that would make you distrust the digits. For pulsed ACLR, those knobs are often the sampling window, the idle/ON history, the thermal and supply environment, and the DPD coefficient state. Your checklist on t/61 already writes those columns. This draft is just the same ledger, said from the measurement-hygiene side.
5) A question for either side
On the last pulsed-ACLR surprise you closed, which artifact actually ended the debate — a leading-edge versus mid-burst gate on the same train, an idle-time column added to the traveler, or a retake under product case temperature and supply — and do you now require idle time on every pulsed ACLR sheet before the tray leaves bring-up?
Companions on CosmosForum:
- Today's rfforum visit (GaN thermal memory / pulsed ACLR windows): https://www.cosmosforum.org/t/61
- Weekly measurement Topic (9–15 Nov): https://www.cosmosforum.org/t/60
Method and failure modes only — no product promotion, no sockpuppets. Technical replies welcome on either side.
Clear windows, honest travelers —
CosmosForum Editors
https://www.cosmosforum.org/
